This series of CNC lathes is an economical and practical universal machining machine, with mature product structure, stable and reliable performance and quality, and is widely used in machining in various industries such as automobiles, petroleum, and military industries.
This series of machine tools has a complete variety, which can realize the processing of the inner and outer surfaces, tapered surfaces, arcs, threads, boring and dumpling holes of shafts and discs, as well as non-circular curves. According to the needs of users, different CNC systems and accessories can be selected.
●The castings are cast by resin sand process, with beautiful appearance and small deformation of the castings. All castings are treated with secondary aging, and the thermal deformation is small.
●Floor-type bed, integral casting water tank, waterproof performance is much better than similar products. The width of the guide rail is 600mm, which is better than similar products.
●The bed guide rail is quenched by super audio frequency, the hardness is HRC55, the thickness is more than 3mm, and it has extremely high precision retention.
●The important mechanical parts of the machine tool have been strengthened with good rigidity.
●Using enlarged and thickened large carriage and middle carriage, the rigidity of the machine tool is better, and the cutting is more stable and powerful.
●High-rigidity spindle system with three-point support and four-way bearing, the absolute temperature rise is less than 25℃.
●The machine tool adopts four-speed frequency conversion, and the main motor adopts a six-stage 11KW frequency conversion spindle special motor, which has a large output torque at low speed.
●The tailstock has a double locking mechanism, and the bottom is equipped with an unloading device, which is light and labor-saving to move the Tailstock.
Model | CK6183 | |
Processing range | Maximum turning diameter of bed | 830mm |
Skateboard swing diameter | 500mm | |
Maximum cutting length | 1000/1500/2000/3000mm | |
Spindle | Spindle end type and code | A2-11 |
Spindle center height | 400mm | |
Spindle speed range | 7~60/18~140/40~330/100~800r/min | |
Spindle speed series | four-speed infinite | |
Spindle diameter | 105mm | |
Spindle taper hole | Metric 120 | |
Main motor power | 11kw frequency conversion (level 6) | |
Rail span | 600 | |
Chuck | Manual | 325 |
Pneumatic | Special (by user) | |
Hydraulic | Special (by user) | |
Spring collet | Special (by user) | |
Feed | Feed motor torque | 15/23N.m |
Z-axis travel | 1000/1500/2000/3000mm | |
X-axis travel | 490mm | |
Fast movement speed | 6/10mm | |
Minimum input unit | 0.001 | |
Tool holder | Four-station tool post | Standard configuration |
Six-station tool holder | Special match | |
Tool holder | Special match | |
Tailstock | Sleeve diameter | 105mm |
Sleeve stroke | 270mm | |
Cone taper | Morse 6 | |
Control System | Guangshu 980 | Standard configuration |
KND1000T | Standard configuration | |
Fanuc, Siemens, Mitsubishi, FAUNC、SIEMENS、MITSUBISHI | Special configuration | |
Machine weight | 4800/5300/5800/6800g | |
Machine tool dimensions (L×W×H) | 1000mm: 3300x1990x1715mm | |
1500mm: 3860x1990x1690mm | ||
2000mm: 4300x2045x1715mm | ||
3000mm: 5300x2045x1715mm |