Castings are made of resin sand, with small shape deformation, all castings are treated by secondary aging, and thermal deformation is small.
Integral bed foot, cast integrated water tank, with a clearing tank, the water pipe is not easy to be blocked, and the performance is better than similar products.
The width of the bed guide is 350mm, and the stability and rigidity of the machine tool are high.
The bed guide rail is quenched by super audio frequency, the hardness is HRC55, the thickness is more than 3mm, and it has extremely high precision retention.
The Headstock has a second-gear shift with more torque in the lower gears.
The spindle diameter is Φ56.
It is especially suitable for roughing and finishing of small and medium-sized parts that require high dimensional accuracy and surface roughness.
The work light uses the most energy-efficient LED tubes.
Fully sealed protection design, exquisite and beautiful structure.
| Model | CK6140T | ||
| Processing range | Maximum turning diameter of bed（mm） | Φ420 | |
| Skateboard swing diameter（mm） | Φ226 | ||
| Maximum cutting length (mm) (two centers) | 750 | ||
| Spindle | Spindle speed range | 80~900/190~2200 | |
| Spindle speed series | 2 | ||
| Spindle diameter（mm） | Φ56 | ||
| Spindle taper hole | Morse 6 | ||
| Chuck | Manual | Φ250 | |
| Pneumatic | |||
| Hydraulic | |||
| Spring collet | |||
| Specification | |||
| Main motor power | 5.5KW | ||
| Feed | Z-axis travel（mm） | 650 | |
| X-axis travel（mm) | 250 | ||
| Fast movement speed（X/Z)(m/min) | 6/8 | ||
| Minimum input unit（mm） | 0.001 | ||
| Feed motor torque（x/z) | 4/6 | ||
| Tool holder | Four-station tool post | Standard configuration | |
| Six-station tool holder | |||
| Arrange the knife holder | |||
| Control System | Guangshu 980 | Special match | |
| KND1000T KND1000T | Standard configuration | ||
| Fanuc, Siemens, Mitsubishi | Special match | ||
| Machine size (L × W × H) | 2165x1390x1565mm | ||
| Machine weight（kg） | about2200 | ||
