This model adopts an integral bed base, a wide-body column, a 12-station servo turret, and a BT40 drilling and milling spindle. It is a high-precision, high-performance turning-milling compound machine tool. The machine tool has a compact structure and meets high rigidity and precision processing requirements. It is suitable for high-volume, high-efficiency and precision processing of flanges, gears, valves, sprockets and other disk and short-axis parts in the automotive parts, military, petroleum machinery, engineering machinery and other industries.
Machine tool features
●The castings are cast using resin sand technology, with beautiful appearance and small deformation.
●Integral bed base: The bed base adopts a thermally symmetrical box-stiffened cast iron structure to minimize thermal deformation and provide strong support during heavy cutting. The chip discharge surface inside the bed base adopts a large inclination angle to prevent the accumulation of iron chips.
●Sleeve-type spindle: The spindle unit adopts a sleeve-type structure to facilitate assembly and maintenance. The spindle unit is a high-rigidity bearing support structure. The spindle has good rigidity, high rotation accuracy, long life, low temperature rise, and good accuracy retention.
●Spindle drive: Using high-power spindle motor, the spindle has C-axis indexing function. With spindle indexing encoder and hydraulic brake
●It adopts an integrated design of electromechanics, hydraulics and gas, equipped with a 12-station turret, BT40 drilling and milling spindle, and a disc tool magazine, so that it can complete multi-process processing in one clamping.
●Z-axis balance design: Equipped with nitrogen balance system to reduce screw load and extend screw service life.
Optional configuration
●Guangzhou CNC, Kaindi, FANUC
●Zhongshi hydraulic chuck, indexing chuck
●Automatic chip conveyor
| Maximum turning diameter on the bed | φ650mm | |
| Maximum machining diameter | φ500mm | |
| Maximum processing length | 500mm | |
| Indexing chuck | φ500mm | |
| Spindle nose | A2-8 | |
| Spindle hole diameter | φ65mm | |
| Spindle maximum speed | 2000rpm | |
| Main motor power | 15/18.5kw | |
| Turret type | 125-480-12 | |
| Knives | φ32/φ50mm | |
| Motor Power | 7.5/11kw | |
| Specification | BT40pulley type | |
| Maximum speed | 4000rpm | |
| Tool magazine | 16 knife disc type | |
| Iiquid nitrogen balance | Nitrogen bottle + balancing cylinder | |
| X/Z axis maximum travel | 430/550mm | |
| X/Z axis rapid traverse speed | 24/24m/min | |
| X/Z axis rail specifications | 45/45 roller | |
| X/Z axis screw specifications | φ32x08/φ40x10 | |
| X/Z axis motor torque | 15/22N.m | |
| Hydraulic pump motor | 2.2kw | |
| Type | Volumetric quantitative lubrication | |
| Cooling pump power | 0.37kw | |
| High pressure pumps | 3.0MPa | |
| Chain plate rear row | Optional side rows | |
| Machine weight | 7000g | |
| Machine tool dimensions (length × width × height) | 2400x2400x2800mm | |
