The castings are cast using resin sand technology. Beautiful appearance and small casting deformation. All castings undergo secondary aging treatment. Thermal deformation is small.

The floor-standing integrated bed adopts a large tilt rear chip discharge method. The guide rail width is 755mm, and its stability is superior to similar products.

The bed guide rail adopts ultrasonic quenching, with a hardness of HRC55 and a thickness of more than 3mm, with extremely high accuracy retention.

The important mechanical parts of the machine tool have been strengthened and have good rigidity.

The use of enlarged and thickened large carriage and medium carriage makes the machine tool more rigid and the cutting more stable and powerful.

It adopts a high-rigidity spindle system with three-point support and four bearings.

The machine tool adopts automatic four-speed frequency conversion, and the main motor adopts a four-stage 30KW frequency conversion spindle special motor with large output torque at low speed.

The tailstock adopts a strong locking mechanism of two pressure plates, and a fixed pin is installed at the bottom for easy positioning; a rack is installed on the back of the bed, and the moving tailstock is driven by the rack and rack to make it lighter and more labor-saving.