Features
Parameters
● Castings are made of resin sand, with small shape deformation, all castings are treated by secondary aging, and thermal deformation is small.
● Integral bed foot, cast integrated water tank, with a clearing tank, the water pipe is not easy to be blocked, and the performance is better than similar products.
● The width of the bed guide is 350mm, and the stability and rigidity of the machine tool are high.
● The bed guide rail is quenched by super audio frequency, the hardness is HRC55, the thickness is more than 3mm, and it has extremely high precision retention.
● The Headstock has a second-gear shift with more torque in the lower gears.
● The spindle diameter is Φ56.
● It is especially suitable for roughing and finishing of small and medium-sized parts that require high dimensional accuracy and surface roughness.
● The work light uses the most energy-efficient LED tubes.
● Fully sealed protection design, exquisite and beautiful structure.
| Model | CK6140T | ||
| Processing range | Maximum turning diameter of bed（mm） | Φ420 | |
| Skateboard swing diameter（mm） | Φ226 | ||
| Maximum cutting length (mm) (two centers) | 750 | ||
| Spindle | Spindle speed range | 80~900/190~2200 | |
| Spindle speed series | 2 | ||
| Spindle diameter（mm） | Φ56 | ||
| Spindle taper hole | Morse 6 | ||
| Chuck | Manual | Φ250 | |
| Pneumatic | |||
| Hydraulic | |||
| Spring collet | |||
| Specification | |||
| Main motor power | 5.5KW | ||
| Feed | Z-axis travel（mm） | 650 | |
| X-axis travel（mm) | 250 | ||
| Fast movement speed（X/Z)(m/min) | 6/8 | ||
| Minimum input unit（mm） | 0.001 | ||
| Feed motor torque（x/z) | 4/6 | ||
| Tool holder | Four-station tool post | Standard configuration | |
| Six-station tool holder | |||
| Arrange the knife holder | |||
| Control System | Guangshu 980 | Special match | |
| KND1000T KND1000T | Standard configuration | ||
| Fanuc, Siemens, Mitsubishi | Special match | ||
| Machine size (L × W × H) | 2165x1390x1565mm | ||
| Machine weight（kg） | about2200 | ||
浙公网安备33071802889448号