Features
Parameters
● Castings are cast by resin sand process, with beautiful appearance and small deformation of castings. All castings are treated twice, and thermal deformation is small.
● The floor-standing bed and the integral casting return tank are much better than similar products in waterproofness, and the guide rail width is 720mm, which is better than similar products.
● The bed guide rail is quenched by super audio frequency, the hardness is HRC55, the thickness is more than 3mm, and it has extremely high precision retention.
● The important parts of the mechanical part of the machine have been strengthened and have good rigidity.
● The use of enlarged and thickened large carriages and middle carriages makes the machine tool more rigid, and the cutting is more stable and powerful.
● The high-rigidity spindle system with three-point support and four-way bearing is adopted, and the absolute temperature rise is less than 25℃.
● The machine tool adopts four-speed frequency conversion, and the main motor adopts a six-stage 15KW frequency conversion spindle special motor, which has a large output torque at low speed.
● The tailstock has a double locking mechanism, and the bottom is equipped with an unloading device to move the Tailstock lightly and effortlessly.
| Model | CK61100 | ||
| Processing range | Maximum turning diameter of bed（mm） | 1100 | |
| Skateboard swing diameter（mm） | 680 | ||
| Maximum cutting length (mm) (two centers) | 1500 | ||
| Spindle | Spindle end form and code | C-11 | |
| Spindle center height | 545 | ||
| Spindle speed range | 7~60/18~140/40~330/100~800 | ||
| Spindle speed series | four-speed infinite | ||
| Spindle diameter（mm） | Φ105 | ||
| Spindle taper hole | Metric 120 | ||
| main motor power | 15KW frequency conversion (level 6) | ||
| Rail span | 720 | ||
| Chuck | Manual | Φ600 | |
| Pneumatic | Special (by user) | ||
| Hydraulic | Special (by user) | ||
| Spring collet | Special (by user) | ||
| Feed | Feed motor torque(x/z) | 15/18X3（reducer） | |
| Z-axis travel（mm） | 1500 | ||
| X-axis travel（mm) | 650 | ||
| fast movement speed（X/Z)(m/min) | 6/10 | ||
| Minimum input unit（mm） | 0.001 | ||
| Tool holder | Four-station tool post | Standard configuration | |
| Six-station tool holder | Special match | ||
| Arrange the knife holder | Special match | ||
| Tailstock | Sleeve diameter | Φ125 | |
| Sleeve stroke | 270 | ||
| Cone taper | Morse 6 | ||
| Control System | Guangshu 980 | Special match | |
| KND1000T KND1000T | Standard configuration | ||
| Fanuc, Siemens, Mitsubishi | Special match | ||
| Machine size (length × width × height) | 4100×2800×2300mm | ||
| Machine weight（kg） | 7600 | ||
浙公网安备33071802889448号