Features
Parameters
● The castings are cast using resin sand technology. Beautiful appearance and small casting deformation. All castings undergo secondary aging treatment. Thermal deformation is small.
● The floor-standing integrated bed adopts a large tilt rear chip discharge method. The guide rail width is 755mm, and its stability is superior to similar products.
● The bed guide rail adopts ultrasonic quenching, with a hardness of HRC55 and a thickness of more than 3mm, with extremely high accuracy retention.
● The important mechanical parts of the machine tool have been strengthened and have good rigidity.
● The use of enlarged and thickened large carriage and medium carriage makes the machine tool more rigid and the cutting more stable and powerful.
● It adopts a high-rigidity spindle system with three-point support and four bearings.
● The machine tool adopts automatic four-speed frequency conversion, and the main motor adopts a four-stage 30KW frequency conversion spindle special motor with large output torque at low speed.
● The tailstock adopts a strong locking mechanism of two pressure plates, and a fixed pin is installed at the bottom for easy positioning; a rack is installed on the back of the bed, and the moving tailstock is driven by the rack and rack to make it lighter and more labor-saving.
| Model | CK61125 | CK6185 | ||
| Processing range | Maximum rotation diameter of bed（mm） | 1250 | 850 | |
| Skateboard rotation diameter（mm） | 890 | 510 | ||
| Maximum work piece length（mm） | 1500/2000/3000/4000/5000 | 1500/2000/3000/4000/5000 | ||
| Maximum cutting lengthmm） | 1250/1750/2750/3750/4750 | 1250/1750/2750/3750/4750 | ||
| Spindle | Spindle end form and code | A2-15 | A2-11 | |
| Spindle center height | 635 | 405 | ||
| Spindle speed range（r/min） | 5-40/41-80/81-160-161-630 | 5-40/41-80/81-160-161-630 | ||
| Spindle speed series | Automatic four-speed stepless | Automatic four-speed stepless | ||
| Spindle bore diameter（mm） | Φ130 | Φ100 | ||
| Spindle taper hole | 公制140 | 公制120 | ||
| Main motor power（Kw） | 30 | 18.5 | ||
| Rail width | 755 | 600 | ||
| Chuck | Manual | Φ1000 Four-claw single action | Φ500 three claws | |
| Pneumatic | Special allocation (by user) | Special allocation (by user) | ||
| Hydraulic | Special allocation (by user) | Special allocation (by user) | ||
| Spring collet | Special allocation (by user) | Special allocation (by user) | ||
| Feed | Feed motor torqueN.m（x/z） | 18.6/28.4+(1:2)slow down | 18.6/28.4+(1:2)slow down | |
| Z-axis travel（mm） | 1500/2000/3000/4000/5000 | 1500/2000/3000/4000/5000 | ||
| X-axis travel（mm） | 630 | 520 | ||
| Fast movement speed（X/Z）（m/min） | 4/6 | 4/6 | ||
| Minimum input unit（mm） | 0.001 | 0.001 | ||
| Knife holder | Four-station tool holder | Standard configuration | Standard configuration | |
| Six-station tool holder | Special configuration | Special configuration | ||
| Tool holder | Special configuration | Special configuration | ||
| Tailstock | Sleeve diameter（mm） | Φ160 | Φ120 | |
| Sleeve stroke（mm） | 300 | 250 | ||
| Taper hole taper | Φ80（1:20） | Mosque No. 6 | ||
| Control System | Guangshu 980 | Optional | Optional | |
| Kanedi KND2000TF2i-D | Standard configuration | Standard configuration | ||
| Fanuc, Siemens, Mitsubishi, FAUNC、SIEMENS、MITSUBISHI | Special configuration | Special configuration | ||
| Machine size (length*width*height)（mm） | 1500: 4640x2560x2210 | 1500mm: 4000x2470x2160 | ||
| 2000mm: 5140x2560x2210 | 2000mm: 4500x2470x2160 | |||
| 3000: 6140x2560x2210 | 3000mm: 5250x2470x2160 | |||
| 4000mm: 7140x2560x2210 | 4000mm: 6250x2470x2160 | |||
| Machine weight（kg） | 5000: 8140x2560x2210 | 5000mm: 7250x2470x2160 | ||
浙公网安备33071802889448号