Features
Parameters
● The castings are cast by resin sand process, with beautiful appearance and small deformation of the castings. All castings are treated by secondary aging, and the thermal deformation is small.
● Floor-standing bed, integral casting water tank, waterproof performance is much better than similar products, guide rail width 600mm, better than similar products.
● The bed guide rail is quenched by super audio frequency, the hardness is HRC55, the thickness is more than 3mm, and it has extremely high precision retention.
● The important parts of the machine tool are all strengthened and have good rigidity.
● The use of enlarged and thickened large carriages and middle carriages makes the machine tool more rigid, and the cutting is more stable and powerful.
● The high-rigidity spindle system with three-point support and four-way bearing is adopted, and the absolute temperature rise is less than 25℃.
● The machine tool adopts four-speed frequency conversion, and the main motor adopts a six-stage 11KW frequency conversion spindle special motor, which has a large output torque at low speed.
● The tailstock has a double locking mechanism, and the bottom is equipped with an unloading device to move the Tailstock lightly and effortlessly.
| Model | CK61125 | CK61100 | ||
| Processing range | Maximum turning diameter of bed（mm） | 1250 | 1000 | |
| Skateboard swing diameter（mm） | 900 | 700 | ||
| Maximum cutting length (mm) (two centers) | 1000/1500/2000/3000 | 1000/1500/2000/3000 | ||
| Spindle | Spindle end form and code | A2-11 | A2-11 | |
| Spindle center height | 625 | 500 | ||
| Spindle speed range（r/min） | 7~60/18~140/40~330/100~800 | 7~60/18~140/40~330/100~800 | ||
| Spindle speed series | four-speed infinite | four-speed infinite | ||
| Spindle diameter（mm） | Φ105 | Φ105 | ||
| Spindle taper hole | Metric 120 | Metric 120 | ||
| Main motor power（Kw） | 11KW frequency conversion (level 6) | 11KW frequency conversion (level 6) | ||
| Rail span | 600 | 600 | ||
| Chuck | Manual | Φ500 | Φ500 | |
| Pneumatic | Special (by user) | Special (by user) | ||
| Hydraulic | Special (by user) | Special (by user) | ||
| Spring collet | Special (by user) | Special (by user) | ||
| Feed | Feed motor torque（x/z） | 15/23 | 15/23 | |
| Z-axis travel（mm） | 1000/1500/2000/3000 | 1000/1500/2000/3000 | ||
| X-axis travel（mm） | 650 | 570 | ||
| Fast movement speed（X/Z）（m/min） | 6/10 | 6/10 | ||
| Minimum input unit（mm） | 0.001 | 0.001 | ||
| Tool holder | Four-station tool post | Standard configuration | Standard configuration | |
| Six-station tool holder | Special match | Special match | ||
| Tool holder | Special match | Special match | ||
| Tailstock | Sleeve diameter（mm） | Φ105 | Φ105 | |
| Sleeve stroke（mm） | 270 | 270 | ||
| Cone taper | Morse 6 | Morse 6 | ||
| Control System | Guangshu 980 | Standard configuration | Standard configuration | |
| Kanedi KND1000T | Standard configuration | Standard configuration | ||
| Fanuc, Siemens, Mitsubishi，FAUNC、SIEMENS、MITSUBISHI | Special match | Special match | ||
| Machine size (L*W*H)（mm） | 1000mm: 3300*2343*2090 | 1000mm:3300*2163*1840 | ||
| 1500mm:3800*2343*2090 | 1500mm:3800*2163*1840 | |||
| 2000mm:4300*2343*2090 | 2000mm:4300*2163*1840 | |||
| 3000mm:5300*2343*2090 | 3000mm:5300*2163*1840 | |||
| Machine weight（kg） | 6300/6800/7300/8300 | 5500/6000/6500/7500 | ||
浙公网安备33071802889448号